Networking > Range Ext. / Access Points
TP-LINK (EAP725-WALL) BE3600 Dual Band Wall Plate Wi-Fi 7 Access Point, PoE, 2.5GB Ports, 160MHz Bandwidth, Omada Mesh, Multi-RUs

Downlink: 1 x 2.5G Ethernet + 2 x Gigabit Ethernet
(The 2.5G port supports PoE pass-through - requires 802.3at/bt input. If power consumption of the APs downstream device exceeds 7W, the AP needs an 802.3bt input)
2.4GHz: 2x 4 dBi
5GHz: 2x 5 dBi
802.3at: 17W (PoE Out support 7W)
5GHz: Up to 2882 Mbps
<23 dBm (5GHz, band 1 & band 2, EIRP)
<25 dBm (5GHz, band 3, EIRP)
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Seamless Roaming
Beamforming
Rate Limit (Based on SSID/Client)
Load Balance
Airtime Fairness
Band Steering
Reboot Schedule
Wireless Schedule
RADIUS Accounting
MAC Authentication
Wireless Statistics
Static IP/Dynamic IP
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
VLAN
Rogue AP Detection
WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Centralized Management (Cloud-Based, Hardware, Software Controller)
Cloud Access - Requires controller
Email Alerts
LED ON/OFF Control
Management MAC Access Control
SNMP: v1, v2c, v3
System Logging Local/Remote Syslog
SSH
Web-based Management
L3 Management
Multi-site Management
Management VLAN
Zero-Touch Provisioning (Requires Omada Cloud-Based Controller)
Coverage: 50m sq.
Concurrent Clients: 250+
160 MHz bandwidth
Multi-RUs
Storage Temperature: -40–70 °C (-40–158 °F)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing
Installation Guide
Mounting Kits