Add a 1080p display to the glass side panel of your PC case

• Panel Size (inch): 13.3
• Aspect Ratio: 16:9
• Display Viewing Area (H x V): 293.76 x 165.24
• Display Surface: Anti-Glare
• Backlight Type: LED
• Panel Type: IPS
• Pixel Pitch: 0.153mm
• Resolution: 1920 x 1080
• Brightness (Typ.): 300 cd/m2
• Contrast Ratio (Typ.): 800:1
• Display Colors: 16.7M (8 bit)
• Refresh Rate (Max): 60 Hz
• Adhesive mounting brackets

• Faster response times.
• Wider viewing angles.
• Superior color contrast.
• Outstanding color accuracy.

• Step 1. Make sure you have a transparent tempered glass side panel for your PC case. The transparency of your side panel may affect the display quality of your eDP panel.*
• Step 2. Paste the bracket to the desired location on the internal side of the PC side panel. Press and hold the bracket for a few seconds to ensure adhesion.
• Step 3. Install the other bracket on the top edge of the eDP panel. Hold the sides of the eDP panel assembly. Obliquely insert it into the groove of the bottom bracket. Then carefully push it toward the glass panel until the top bracket is firmly adhered.
• Step 4. Connect the smaller end of the eDP cable to the eDP panel.
• Step 5. Connect the other end of the cable to the 40-pin eDP connector on the motherboard.