The Dynamode M-ADSL-FILTER-Y is a full UK standard spec ADSL Microfilter for BT exchanges within the UK.
Featuring high-performance circuits to keep telephone conversations at high quality and at the same time maintain optimum ADSL line speeds all the way up to ADSL2 8 Mbps specifications.
All requirements for this specification can be met in the presence of all POTS loop currents from 0 mA to 100 mA. This Single In-Line filter can pass POTS tip-to-ring DC voltages of 0 V to 105 V and ringing signals of 40 Vrms to 150 Vrms at any frequencies from 15.3 Hz to 68 Hz superimposed on DC voltages in the range from 0 V to 105 V. The DC resistance from tip-to-ring at the line port interface with the phone interface shorted, shall be less than or equal to 50 ohms for one filter. The DC resistance from tip-to-ground and from ring-to-ground at the Phone interface with the Line interface open shall be greater than or equal to 10 Megohms. The ground point shall be local building or green wire ground. As an objective, the DC resistance should exceed 10 MW.
Spire Technology Ltd. Registered in England No: 2447513 - VAT No: GB 541 8952 25 - Registered Office: 5 Black Moor
Rd, Ebblake Industrial Estate, Verwood, Dorset. BH31 6AX E&OE Whilst every effort has been made to ensure the prices
and specification on this website are correct, it is provided on the understanding that Spire Technology Ltd. shall not
be liable under any circumstances for any consequential loss or damages (including, without limitation, loss of profit
or other economic loss and whether caused by the negligence of ourselves, our employees or agents or otherwise) which
arises out of or in connection with the information provided on the Site.
We use Google Analytics to help improve the quality of the services we offer.
By clicking here or by viewing another page, you are giving your consent for us to use our cookies