Arctic P8 8cm Pressure Optimised PWM PST Case Fan w/ Cable Splitter (5 Pack), Black, Fluid Dynamic, 200-3000 RPM, Value Pack

Stock Code

CF80-ARCP8PWMPST-5PK

Manufacturer Link

ARCTIC

Manufacturer Code

ACFAN00154A

EAN Number

4895213702072

Description

80 mm PWM Fan with Cable Splitter - 5 Pack

Optimised for static pressure
Ideal choice on heatsinks, radiators and covered case vents
Newly developed, very quiet motor
Wide RPM range
Extended life span
High Quality Bearing
PWM Sharing Technology (PST) regulates fan speed synchronously
Push or pull-configuration

Optimised for Static Pressure

During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators.

More Efficient Technology

The motor is driven by a latest-generation PWM IC, which enables the new P8 PWM PST to operate much more efficiently than its predecessors. This saves energy without compromising performance.

Maximum Quietness, Minimum Vibration

Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.

200 to 3000 RPM Regulated via PWM PST

Thanks to the 4-Pin Connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.

High-Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Two Way Installation

Push warm air out of the case
Pull cool air into your case

Full Specification

Type

80mm Case Fan

Fan Connector(s)

4-pin

Fan Controller

PWM

Installation

Screws

Colour

Black

LED Lighting

Weight

81 g

Fan Dimensions

80 x 80 x 25 mm
Cable Length: 400 mm

Rotation Speed

200 - 3000 RPM

Fan Bearing

Fluid Dynamic Bearing

Air Flow

23.4 cfm

Noise level

0.3 Sone

Power

Current/Voltage: 0.09 A/12 V
Starting Voltage: 3.4 V

Additional Features

See Overview

Package Type

Retail

Package Weight

0.4690 kg

Warranty

6 Years

Colour

Black

Full Box Quantity